Automatic mode activated.
Input configuration: Setting.json
Output configuration: SettingOut.json
Shot number is: 0
List of active spectrometers from JSON (5):
 0 HR+C1886 alias IRVISUV
 1 HR+C1834 alias Halpha
 2 HR+C0732 alias VIS
 3 HR+C2729 alias IR
 4 HR2+C1103 alias UV
Connected to spectrometer [0]
 Spectrometer[0] model: HR2000PLUS
 Spectrometer[0] serial number: HR2+C1103
Connected to spectrometer [1]
 Spectrometer[1] model: HR2000PLUS
 Spectrometer[1] serial number: HR+C1834
Could not open device with ID 2. error=-1
Not all requested spectrometers found.
Setting spectrometer HR+C1834 (Halpha)
 Firmware: 12344
 High Delay is 0 (set is 0), Low Delay is 1000 (set is 1000)
 Spectrometer strobe is enabled
 Setting integration time:
   Trigger mode is Software (0)
   Integration time is 20000 us
   Spectrum length is 2048
   Specta count is 2
   Spectrum was acquired to set spectrometer
   Trigger mode is Hardware
 Done
Setting spectrometer HR2+C1103 (UV)
 Firmware: 12345
 High Delay is 0 (set is 0), Low Delay is 1000 (set is 1000)
 Spectrometer strobe is enabled
 Setting integration time:
   Trigger mode is Software (0)
   Integration time is 20000 us
   Spectrum length is 2048
   Specta count is 2
   Spectrum was acquired to set spectrometer
   Trigger mode is Hardware
 Done
Collecting spectra