Comment: Sensitivity too high, then power source from 3kV to 2.5kV, Cs Calibration

Golem shot: 5236

Basic parameters:

• Chamber pressure before gas filling (vacuum pressure): p_chinit = 3.67 mPa
  http://golem.fjfi.cvut.cz/operation/shots/5236/Initial_PfeifferMerkaVakua
• Chamber pressure just before the triggering: p_chtrig=3.67 mPa
  http://golem.fjfi.cvut.cz/operation/shots/5236/Aktual_PfeifferMerkaVakua
• Working gas pressure request: p_H2req=0 mPa
  http://golem.fjfi.cvut.cz/operation/shots/5236/pressure_setting_mPa
• Chamber temperature: T_ch= °C over the room temperature (thermocouple)
  http://golem.fjfi.cvut.cz/operation/shots/5236/Aktual_TermoclanekNaKomore
• C_B capacitors charged to U_CB=500 V
  http://golem.fjfi.cvut.cz/operation/shots/5236/nabijeni/Ub_limit
• C_BD capacitors charged to U_CBD=0 V
  http://golem.fjfi.cvut.cz/operation/shots/5236/nabijeni/Ubd_limit
• C_BD capacitors triggered τ_BD=0,0 ms after B_t
  http://golem.fjfi.cvut.cz/operation/shots/5236/Tbd_aktual ![μs]
• C_CD capacitors charged to U_CCD=450 V
  http://golem.fjfi.cvut.cz/operation/shots/5236/nabijeni/Ucd_limit
• C_CD capacitors triggered τ_CD=1,0 ms after B_t
  http://golem.fjfi.cvut.cz/operation/shots/5236/Tcd_aktual ![μs]
• charging log: (t, U_CB, U_CBD, U_CCD, U_CDS, p_chamber)
  http://golem.fjfi.cvut.cz/operation/shots/5236/nabijeni/Time_AD4ETHb

Diagnostics:

• Raw data (U_loop,B_t,I_p+ch,U_PhotoC)
  http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/usbscopes (tabs & decimal point format)
  http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/usbscopes_dc (tabs & decimal comma format ... available from No:3553)
• Figures:
  raw data: http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/graphpresb.png
  integrated data (I_ch+p): http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/graphpresi.png
  integrated data (I_p): http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/graphpresb.png
  zoomed data: http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/graphpresb.png
• Extracts (decimal point/comma point format):
  Loop voltage: <t,U_loop>:http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/(Uloop_dp.csv/Uloop_cp.csv)
  B coil: <t,B_t>:http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/(Btoroidal_dp.csv/Btoroidal_cp.csv)
  Rogowski coil: <t,I_ch+p>:http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/(Irogowski_dp.csv/Irogowski_cp.csv)
  Rogowski coil: <t,I_p>:http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/(Iplasma_dp.csv/Iplasma_cp.csv)
  Photocell: <t,I_rad>:http://golem.fjfi.cvut.cz/operation/shots/5236/basicdiagn/(Photod_dp.csv/Photod_cp.csv)

---

Comments:

• How to access such data? Try e.g. Wget
• Any comments, suggestions? Do you miss something? Send an e-mail
• Sorry for mixing english and czech language, will be corrected later on ...