Help on module gte_control:
NAME
gte_control
FILE
c:\users\skuba\documents\jupyter\gte_control.py
FUNCTIONS
add_num(num, name='counter.txt')
Adds 1 to num ands saves as shot number into counter file.
Input:
num -- int, number of previous shot
name = counter.txt -- string, name of file containign counter
charge(wait=2, url='http://192.168.254.2/', shortcut=1, charging=2)
Charges condenser.
Input:
wait = 2 -- duration of charging in seconds
url = IP -- ip adress of I/O module
shortcut = sc -- number of relay switching shortcutting
charging = ch -- number of relay switching charging
close_all(url='http://192.168.254.2/')
Switches all relays to defaul position, called 'off'.
Input:
url = IP -- ip adress of I/O module
discharge(wait=0.5, stab=False, url='http://192.168.254.2/', disch=8, cstab=7, delay=0.1)
Discharges condenser.
Input:
wait = 0.5 -- delay between opening discharging relay and shortcutting condenser
stab_i = False -- toggles current stabilisation
url = IP -- ip adress of I/O module
disch = dch -- number of relay switching discharging
thyr = th --number of relay switching thyristor
get_num(name='counter.txt')
Loads shot number from file.
Input:
name = counter.txt -- string, name of file containign counter
input_read(num, url='http://192.168.254.2/')
Gets input messured on I/O module's input numbered num
Input:
num -- number of input
url = IP -- ip adress of I/O module
Output:
val -- int, 1 or 0 representing logical values on or off
make_graphs(graphs, save=False)
shot(wait=0.1, chwait=2, dchwait=0.5, url='http://192.168.254.2/', stab_i=False, cstab=7, graphs=[], save=False, noscope=False)
Executes Golem tokamak like shot: charges and discharges condenser.
Input:
wait = 0.1 -- delay between charge and discharge in seconds
chwait = 2 -- duration of charging in seconds
dchwait = 0.5 -- duration of discharge in seconds
url = IP -- ip adress of I/O module
stab_i = False -- toggles current stabilisation
cstab = cur_stab -- number of relay switching current stabilisation on
graphs = [] -- numbers of channels on osciloscope to be ploted
save = False -- enables saving graphs to file
noscope = False -- disables osciloscope
Output:
none or graphs
switch_off(num, url='http://192.168.254.2/')
Switches off relay numbered num.
Input:
num -- number of relay to be switched
url = IP -- ip adress of I/O module
switch_on(num, url='http://192.168.254.2/')
Switches on relay numbered num.
Input:
num -- number of relay to be switched
url = IP -- ip adress of I/O module
