Tokamak GOLEM - Shot Database - #41927

The date of discharge execution23-05-24 12:01:01 The session missionTrainingCourses/Universities/MEPhI.ru/23BiasingAndMHD --> MHD studies with biasing The session ID41921 The discharge commentMaster testDischarge command/Dirigent.sh --discharge --operation.discharge "style='standard',voice='on',analysis='on',vacuum_shot='41925'" --infrastructure.bt_ecd "U_Bt=1000,t_Bt=0,O_Bt='CW',U_cd=500,t_cd=0,O ...

     Technological parameters

• Working Gas: \(p\sub{chamber}\sup{discharge,before}\)=0,92 mPa; \(p\sub{chamber}\sup{discharge,pre}\)=5,10 mPa (\(p\sub{WG}\sup{request}\)= 16 mPa@\(X\sub{WG}\sup{request}\)=H )
• Toroidal magnetic field: \(U\sub{B\sub{t}}\sup{request}\)=1000 V@\(t\sub{B\sub{t}}\sup{request}\)=0,0 us
• Current drive field: \(U\sub{E\sub{cd}}\sup{request}\)=500 V@\(t\sub{cd}\sup{request}\)=0,0 us

    Plasma:

• Plasma: yes or no: ☑
• Time parameters:\(\Delta t\sub{p}\)=4,89 ms (from:\(t\sub{start}\)=2,27 ms,to:\(t\sub{end}\)=7,15 ms)

    Plasma parameters:

• Loop voltage:\(\overline{U\sub{loop}}\)\(\)=9,33 V; \(\maximum{{\tau \in [discharge]}U\sub{loop}}\)=11,22 V; \(U\sub{breakdown}\)=0,00 V
• Toroidal magnetic field: \(\overline{B\sub{t}}\)=0,18 T; \(\max_{\tau \in [discharge]}B\sub{t}\)=0,26 T
• Plasma current: \(\overline{I\sub{p}}\)=1,63 kA; \(\max_{\tau \in [discharge]}I\sub{p}\)=2,14 kA; \(t\sub{Ip}\sup{max}\)=0,00 ms

Basic Diagnostics    

On stage diagnostics

Data flow	measurement →		digitization →		analysis →
Name	Experiment setup		Data acquistition system		Raw data		Analysis results
						☛

Off stage diagnostics

Data flow	measurement →		digitization →		analysis →
Name	Experiment setup		Data acquistition system		Raw data		Analysis results
						☛
						☛
						☛

Analysis

Name	Analysis results
		☛

Infrastructure

Working gas:S_mode='p_wg',S_gas='H',p_H=16
Bt, Ecd:U_Bt=1000,t_Bt=0,O_Bt='CW',U_cd=500,t_cd=0,O_cd='CW'
Position stabilization: main_switch='on',vertical_switch='on',vertical_waveform='3000,0;7000,-5;8000,-20;30000,0',radial_switch='on',radial_waveform='2000,0;3000,-5;5000,-20;30000,0'
							☛
Biasing electrode:main_switch='on',waveform='1000,0;2000,-10;5000,0;6000,0;14000,0'

The tokamak GOLEM is now in the Standby mode.

Acknowledgement

---

Thanks to the specific help

The tokamak GOLEM controll SW @